* rohs directive 2002/95/ec jan 27 2003 including annex specifications are subject to change without notice. customers should verify actual device performance in their specific applications. max. hold trip one hour max. time tripped interrupt current current initial resistance post-trip to trip power max. ratings resistance @ 1 a dissipation model operating voltage volts amps amps amps ohms ohms ohms seconds watts at 23 c at 23 c at 23 c at 23 c at 23 c at 23 c at 23 c max. max. min. max. max. typ. mf-r015/600 60 600 3 0.15 0.30 6.0 12.0 22.0 5.0 1.0 mf-r015/600-a 60 600 3 0.15 0.30 7.0 10.0 20.0 5.0 1.0 mf-r015/600-b 60 600 3 0.15 0.30 9.0 12.0 22.0 5.0 1.0 mf-r015/600-f 60 600 3 0.15 0.30 7.0 12.0 22.0 5.0 1.0 mf-r016/600 60 600 3 0.16 0.32 4.0 10.0 18.0 7.0 1.0 mf-r016/600-a 60 600 3 0.16 0.32 4.0 7.0 16.0 7.0 1.0 mf-r016/600-1 60 600 3 0.16 0.32 4.0 8.0 17.0 7.0 1.0 mf-r/600 series - telecom ptc resettable fuses electrical characteristics features radial leaded devices maximum 600 vac interrupt fault rating available in matched resistance ?ins ability to withstand lightning surges rohs compliant*, lead free agency recognition: applications customer premise equipment (cpe): modems cable modems fax machines pos equipment security equipment set top boxes operating/storage temperature ..............................-40 ? to +85 ? maximum device surface temperature in tripped state......................................................125 ? passive aging ..........................................................+85 ?, 1000 hours ...................................... ....................? % typical resistance change +60 ?, 1000 hours ? % typical resistance change humidity aging ........................................................+85 ?, 85 % r.h. 500 hours .............................. ............? % typical resistance change thermal shock ........................................................mil-std-202f, method 107g, ................................ ........?0 % typical resistance change +125 ? to -55 ?,10 times ?5 % typical resistance change solvent resistance ..................................................mil-std-202, method 215b................................... .........no change lead solerability ......................................................ansi/j-std-002 flammability ............................................................iec 695-2-2............................................ ..........................no flame for 60 secs. vibration ..................................................................mil-std-883c, method 2007.1, condition a............ ......no change environmental characteristics test test conditions accept/reject criteria visual/mech. ......................................................verify dimensions and materials..................per mf physi cal description resistance ..........................................................in still air @ 23 ? ....................................... .rmin r rmax time to trip ........................................................5 times ihold, vmax, 23 ?..........................t max. time to trip (seconds) hold current ......................................................30 min. at ihold............................................n o trip trip cycle life ....................................................vmax, imax, 100 cycles ..............................no arcin g or burning trip endurance....................................................vmax, 48 hours ..........................................no ar cing or burning ul file number ..................................................e 174545s csa file number ................................................ca 110338 test procedures and requirements for model mf-r/600 series thermal derating chart - i hold (amps) ambient operating temperature model -40 c -20 c0 c 23 c 40 c 50 c 60 c 70 c 85 c mf-r015/600 0.233 0.206 0.178 0.150 0.124 0.110 0.096 0.083 0.062 mf-r016/600 0.249 0.219 0.190 0.160 0.132 0.117 0.103 0.088 0.066 i trip is approximately two times i hold. *rohs compliant
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. how to order mf - r 015/600 - a 05 - 2 multifuse product designator series r = radial leaded component hold current, i hold 015-016 (0.15 - 0.16 amps) max. interrupt voltage, v resistance range narrow resistance ranges are available on all models as defined in electrical characteristics. resistance bins narrow resistance ranges can be separated into packages where each device is within 0.5 ohms of each other. packaging options - 0 = bulk packaging - 2 = tape and reel* *packaged per eia486-b maximum time to trip at 23 ?c 1000 100 10 1 0.10 0.00 fault current (amps) time to trip (seconds) 0.50 1.00 1.50 2.00 2.50 3.00 mf-r016/600 mf-r015/600 mf-r/600, rev. e, 11/04 a b c d e physical characteristics model max. max. max. min. nom. style lead dia. material mf-r015/600 13.5 12.6 6.0 4.7 5.0 1 0.65 sn/cu (0.531) (0.496) (0.236) (0.185) (0.197) (0.026) mf-r016/600 16.0 12.6 6.0 4.7 5.0 1 0.65 sn/cu (0.629) (0.496) (0.236) (0.185) (0.197) (0.026) product dimensions packaging options: bulk: 500 pcs. per bag. tape & reel: 600 pcs. per reel. longer lead lengths available upon request. mf-r/600 series - telecom ptc resettable fuses mm (inches) dimensions = e d b c a typical part marking represents total content. layout may vary. r015 24001k manufacturer's trademark part identification date code (first digit = last digit of year; second digit = month; next three digits = lot code) mfg. location (k = korea s = china) model rmin. rmax. r1max. bin mf-r015/600 6.0 12.0 22.0 n/a mf-r015/600-a 7.0 10.0 20.0 0.5 mf-r015/600-b 9.0 12.0 22.0 0.5 mf-r015/600-f 7.0 12.0 22.0 0.5 mf-r016/600 4.0 10.0 18.0 n/a mf-r016/600-a 4.0 7.0 16.0 0.5 mf-r016/600-1 4.0 8.0 17.0 0.5 resistance options additional features ability to withstand ac power cross conditions
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. devices taped using eia468?/iec286-2 standards. see table below and figures 1 and 2 for details. iec eia dimensions dimension description mark mark dimensions tolerance carrier tape width ww hold down tape width: w 0 w 4 min. hold down tape no protrusion top distance between tape edges w 2 w 6 max. sprocket hole position w 1 w 5 sprocket hole diameter d 0 d 0 abscissa to plane (straight lead) hh abscissa to plane (kinked lead) h 0 h 0 abscissa to top (straight lead) h 1 h 1 max. abscissa to top (kinked lead) h 1 h 1 max. overall width w/lead protrusion (straight lead) c 1 max. overall width w/lead protrusion (kinked lead) c 1 max. overall width w/o lead protrusion (straight lead) c 2 max. overall width w/o lead protrusion (kinked lead) c 2 max. lead protrusion i 1 l 1 max. protrusion of cutout ll max. protrusion beyond hold tape i 2 i 2 not specified sprocket hole pitch p 0 p 0 pitch tolerance 20 consecutive device pitch: mf-r005?f-r160, mf-r/90, mf-rx110/72?f-rx185/72, mf-r/72 device pitch: mf-r185?f-r400, mf-rx110?f-rx375 mf-r/600, mf-rx250/72?f-rx375/72 tape thickness tt max. tape thickness with splice: mf-r010?f-r160, t 1 max. mf-r/72, mf-rx110/72?f-rx185/72, tape thickness with splice: mf-r250?f-r1100 mf-rx110?f-rx375, mf-r/90, mf-rx250/72?f-rx375/72 t 1 max. splice sprocket hole alignment 0 body lateral deviation ? h ? h 0 body tape plane deviation ? p ? p 0 lead spacing ff reel width ww 2 max. reel diameter da max. space between flanges less device w 1 h mf-r, mf-r/72, mf-r/90, mf-r/600, mf-rx, mf-rx/72 & mf-rx/250 series tape and reel specifications 18 (.709) -0.5/+1.0 (-0.02/+.039) 9 (.354) -0.5/+0.75 (-0.02/+0.03) 4 (.157) 0.2 (.0078) 18.5 (.728) 3.0 (.118) 16 (.63) 32.2 (1.268) 38.0 (1.496) 43.2 (1.7) 55.0 (2.165) 42.5 (1.673) 54.0 (2.126) 1.0 (.039) 11 (.433) 0.5 (.02) 12.7 (0.5) 12.7 (0.5) 25.4 (1.0) 0.9 (.035) 1.5 (.059) 2.3 (.091) 5.08 (0.2) 56 (2.205) 370 (14.57) 0.3 (.012) 1 (.039) 0.3 (.012) 0.6 (.024) 0.3 (.012) 1.0 (.039) 1.3 (.051) 0.2 (.008) 4.75 (.187) 3.25 (.128) 11 (.433) 3 (.118) dimensions = mm (inches)
mf-r, mf-r/72, mf-r/90, mf-r/600, mf-rx, mf-rx/72 & mf-rx/250 series tape and reel specifications specifications are subject to change without notice. customers should verify actual device performance in their specific applications. t user direction of feed cross section a - b ? p ? p h h 1 reference plane w 0 h 0 w 1 w a b f d 0 p 0 i 1 i 2 l h 1 p 1 ? h ? h h w h f d reel upper side tape lower side user direction of feed reel dimensions - figure 2 taped component dimensions - figure 1 dimensions = mm (inches) iec eia dimensions dimension description mark mark dimensions tolerance arbor hole diameter fc core diameter: mf-r, mf-rx, mf-r/90 hn max. core diameter: mf-rx/250, mf-r/600 hn max. box: mf-r, mf-rx, mf-r/90 max. box: mf-rx/250 max. box: mf-r/600 max. consecutive missing places: mf-r, mf-rx, mf-r/90 3 max. consecutive missing places: mf-rx/250, mf-r/600 none empty places per reel: mf-r, mf-rx, mf-r/90 not specified empty places per reel: mf-rx/250, mf-r/600 0.1 % 26 (1.024) 80 (3.15) 56 (2.2) 372 (14.6) 372 (14.6) 12.0 (.472) 91 (3.58) 67 (2.64) 372 (14.6) 362 (14.25) 64 (2.52) 372 (14.6) 362 (14.25)
|
